Decorating & Renovating
Dear Community,

Our tech team has launched updates to The Nest today. As a result of these updates, members of the Nest Community will need to change their password in order to continue participating in the community. In addition, The Nest community member's avatars will be replaced with generic default avatars. If you wish to revert to your original avatar, you will need to re-upload it via The Nest.

If you have questions about this, please email help@theknot.com.

Thank you.

Note: This only affects The Nest's community members and will not affect members on The Bump or The Knot.

Installing tile, PLEASE HELP ME!!

We have a carpeted master bathroom. I know I know... builders here are dumb. Anyway, my children poured water all over the carpet at some point in the day a few days ago. Didn't know about it. Then it started to smell. Couldn't pinpoint the smell just that it was in our bathroom/closets area. Finally got down on my hands and knees and realized it was the carpet! It was dry, hubs pulled it up, and padding was soaked and a wretched smell was coming from it. We have been meaning to tile since we built the house 4 years ago, just haven't done it. well, now is the time. We aren't financially in a position to pay someone so we are DIYing it. Cost me $200 total for all materials opposed to the $1200 quotes I was getting. Anyway, I'm reading conflicting things and wana know if anyone has put tile on plywood before? Some DIY videos say you need a backerboard, some are saying to do a poly seal on the plywood first... any suggestions? I don't want to raise the floor any more... I want it to be flush with the carpet into our bedroom. So I'm really hoping I can just pour a poly sealant and be done with it.
Image and video hosting by TinyPic
image

MyFitnessPal - Free Calorie Counter


"Karma1969: If baking someone a birthday pie/cake is romantic, I must be a slut."

Re: Installing tile, PLEASE HELP ME!!

  • I have no experience with this project, but I do know if the carpet and tile are not flush, you can buy a strip of metal specifically used to affix to the floor where tile and carpet meet. It makes it a smooth transition.

     

  • My dad and I took on this exact project- carpet in our small bathroom that had years of abuse. We were also really worried about it being higher than our carpet, but actually it wasn't- at all. We didn't even need the metal strip mentioned above. There was a "mat" product at Home Depot we considered using, too, if you're worried about height. We installed plywood as the subfloor (no seal). Remember you may need screw extentions or somesuch so that your toilet installs properly after you replace it.
  • Since it's going to get wet, I would definitely install cement board before laying down the tile.
    Warning No formatter is installed for the format bbhtml
Sign In or Register to comment.
Choose Another Board
Search Boards