September 2010 Weddings
Dear Community,
Our tech team has launched updates to The Nest today. As a result of these updates, members of the Nest Community will need to change their password in order to continue participating in the community. In addition, The Nest community member's avatars will be replaced with generic default avatars. If you wish to revert to your original avatar, you will need to re-upload it via The Nest.
If you have questions about this, please email help@theknot.com.
Thank you.
Note: This only affects The Nest's community members and will not affect members on The Bump or The Knot.
Our tech team has launched updates to The Nest today. As a result of these updates, members of the Nest Community will need to change their password in order to continue participating in the community. In addition, The Nest community member's avatars will be replaced with generic default avatars. If you wish to revert to your original avatar, you will need to re-upload it via The Nest.
If you have questions about this, please email help@theknot.com.
Thank you.
Note: This only affects The Nest's community members and will not affect members on The Bump or The Knot.
jewelry question
my grandmother left me some jewelry. some of it is real gold/diamonds, etc, and some of it is costume jewelry.
one of the rings is HUGE diamonds. it is probably 2 carats (that is huge to me). the ring is imprinted with "10K gold, PUN carats." do you think that means it is fake? we cant tell if it is real or not. i tried googling PUN diamonds, carat weight, etc, and got nothing.
anyone?
Re: jewelry question
I would take it in somewhere and ask... it can't hurt if it is fake and they are the ones that would know if it is real. I have never heard of that before though...
JMO though.
Blog
1. I have no idea what that means
2. Take it to a jeweler
3. Even if it looks completely obviously jokey fake to them, they won't laugh at you. It's their job, so fakes stand out to them more than they would to a normal person. Like how Rachel Zoe could probably spot a fake Prada or some shiit.
Diamond/mirror trick??
I do not know what this is. Also, I've seen BAD fake diamonds, and they get cloudy after a while, so I think this one must be at least a decent fake if you're questioning it.
I'd take it to a jeweler and let them know your late grandmother left you this and need to know if it's real or not. They shouldn't laugh, you're asking an honest question.
PS - I think 2CT is big too
IUI #1 10/12/11 (Bravelle + HCG + Prometrium & acupuncture) = 10/26 BFP! Beta #1=250, Beta #2= 615. 1st u/s 11/8.
I googled and found my answer. Do not try this. It will damage it. My bad.
But I did find this so it might help you...
If the gem in question is loose and unmounted, try placing it over printing. Diamonds refract so much light that they will not work as a magnifying glass and you would see no lines, circles, or letters through them. Other clear stones like glass or crystal will reveal the print clearly. A similar test uses a small light, such as the one that comes with your key ring. If you shine the light through the stone and cannot see it on the other side, but only a bright halo around the rim, it is more likely to be a true diamond.
Diamonds are also very good at conducting heat. Breathe on the surface of the stone and immediately check to see if it has fogged up. Again, quartz, glass, and cubic zirconium will stay hazy for a moment before the condensation dissipates, but you shouldn't be able to see any moisture on a true diamond. However, one rock, called moissanite, will also pass this test, so the best way is to get a complete thermal conductivity evaluation performed by a jeweler.
Looking closely at the specks, ridges, and facets can also give you a clue into the identity of your gem. Diamonds do have inclusions, tiny bits of other minerals that got crushed into the diamond while it formed deep under the earth. However, if the facets have worn or rounded edges, bubbles, or if the gem looks rippled or pitted, it is probably glass. Those gems that are perfectly clear, with absolutely no inclusions, are probably quartz.
Finally, some common sense measures can prevent you from getting pressured to purchase a gem that turns out to be something other than a diamond. It shouldn't be ridiculously inexpensive, or you'll get what you pay for. It also will usually be mounted in an "open back" setting, which means that you can see around the rear of the gem and the back surface isn't coated with any silvery substance. Although it's true that diamonds are the hardest organic substance on earth, the infamous test of scratching diamonds across glass or metal might just give you a damaged diamond. (Sorry again!)
I googled and found my answer. Do not try this. It will damage it. My bad.
But I did find this so it might help you...
If the gem in question is loose and unmounted, try placing it over printing. Diamonds refract so much light that they will not work as a magnifying glass and you would see no lines, circles, or letters through them. Other clear stones like glass or crystal will reveal the print clearly. A similar test uses a small light, such as the one that comes with your key ring. If you shine the light through the stone and cannot see it on the other side, but only a bright halo around the rim, it is more likely to be a true diamond.
Diamonds are also very good at conducting heat. Breathe on the surface of the stone and immediately check to see if it has fogged up. Again, quartz, glass, and cubic zirconium will stay hazy for a moment before the condensation dissipates, but you shouldn't be able to see any moisture on a true diamond. However, one rock, called moissanite, will also pass this test, so the best way is to get a complete thermal conductivity evaluation performed by a jeweler.
Looking closely at the specks, ridges, and facets can also give you a clue into the identity of your gem. Diamonds do have inclusions, tiny bits of other minerals that got crushed into the diamond while it formed deep under the earth. However, if the facets have worn or rounded edges, bubbles, or if the gem looks rippled or pitted, it is probably glass. Those gems that are perfectly clear, with absolutely no inclusions, are probably quartz.
Finally, some common sense measures can prevent you from getting pressured to purchase a gem that turns out to be something other than a diamond. It shouldn't be ridiculously inexpensive, or you'll get what you pay for. It also will usually be mounted in an "open back" setting, which means that you can see around the rear of the gem and the back surface isn't coated with any silvery substance. Although it's true that diamonds are the hardest organic substance on earth, the infamous test of scratching diamonds across glass or metal might just give you a damaged diamond. (Sorry again!)
I googled and found my answer. Do not try this. It will damage it. My bad.
But I did find this so it might help you...
If the gem in question is loose and unmounted, try placing it over printing. Diamonds refract so much light that they will not work as a magnifying glass and you would see no lines, circles, or letters through them. Other clear stones like glass or crystal will reveal the print clearly. A similar test uses a small light, such as the one that comes with your key ring. If you shine the light through the stone and cannot see it on the other side, but only a bright halo around the rim, it is more likely to be a true diamond.
Diamonds are also very good at conducting heat. Breathe on the surface of the stone and immediately check to see if it has fogged up. Again, quartz, glass, and cubic zirconium will stay hazy for a moment before the condensation dissipates, but you shouldn't be able to see any moisture on a true diamond. However, one rock, called moissanite, will also pass this test, so the best way is to get a complete thermal conductivity evaluation performed by a jeweler.
Looking closely at the specks, ridges, and facets can also give you a clue into the identity of your gem. Diamonds do have inclusions, tiny bits of other minerals that got crushed into the diamond while it formed deep under the earth. However, if the facets have worn or rounded edges, bubbles, or if the gem looks rippled or pitted, it is probably glass. Those gems that are perfectly clear, with absolutely no inclusions, are probably quartz.
Finally, some common sense measures can prevent you from getting pressured to purchase a gem that turns out to be something other than a diamond. It shouldn't be ridiculously inexpensive, or you'll get what you pay for. It also will usually be mounted in an "open back" setting, which means that you can see around the rear of the gem and the back surface isn't coated with any silvery substance. Although it's true that diamonds are the hardest organic substance on earth, the infamous test of scratching diamonds across glass or metal might just give you a damaged diamond. (Sorry again!)
TN is all sorts of messed up. And also super slow today.
I doubt the ring is moissanite, I think that's a newer thing, so sounds like the condensation trick might work!