Buying A Home
Dear Community,

Our tech team has launched updates to The Nest today. As a result of these updates, members of the Nest Community will need to change their password in order to continue participating in the community. In addition, The Nest community member's avatars will be replaced with generic default avatars. If you wish to revert to your original avatar, you will need to re-upload it via The Nest.

If you have questions about this, please email help@theknot.com.

Thank you.

Note: This only affects The Nest's community members and will not affect members on The Bump or The Knot.

mold in the basement

Hi all,

We moved into our house in february.  the home inspector didn't find any mold, however there was some evidence that there had been water in the basement at some point.  

On move in day my dad and I were looking at the furnace more closely and discovered that it has a humidifier attached to it (to which my father said "My parents used to have one of these, they're fantastic, it should be turned on") and my dad turned it on.  about 3 hours later we discovered the humidifier was not shutting the water supply off (result=1+ inch of water in the basement).  we got the wet vac and cleaned-up, discovered the shut-off for the water supply had been turned off by the previous owners because they weren't using the humidifier.

 anyways 3 months later I've noticed mold growing about 10" up on the sheet-rock that got wet. we're planning to cut off the sheet-rock right above the waterline and replace it with new...should we cut higher?

Image and video hosting by TinyPic Wedding Countdown Ticker

Re: mold in the basement

  • You'll need to cut it up as far as you still find mold.  There's probably mold higher up on the back of the drywall than you would think.

  • When my parents home was flooded by Hurricane Isabelle way back when, their contractor said the initial drywall cut should be 12" above where the visual evidence of mold ends. So even though they only had about 10" of water in their house, the first 2' of the walls were removed and left open for several days with fans on to dry out the framing and such. Once you open up the walls, you can get a moisture meter to help you figure out what is still damp and measure when that dampness is totally gone. Good luck!
Sign In or Register to comment.
Choose Another Board
Search Boards